UV curing glue Water-based cleaner T1012A

Category：Water-based cleaner
The number of clicks：
Release date：2020-05-21
在线询价

Detailed introduction

Part I Chemical products and company identification

chemical product

Product Name: TENICK T1012A

Recommended use: Used to remove UV curable adhesives and residues and contaminants.

Company logo

Brand	Supplier (Company Name / Address / Phone)	Company website
TENICK Singapore	Supplier name：SINGAPORE TENICK CLEANING TECHNOLOGY PTE.LTD. supplier address：50 Raffles Place,#34-04 Singapore Land Tower Singapore 048623 Supplier phone：(65)65326932	www.tenic.sg

Part II Hazard Overview

Classification: This product is not dangerous.

Hazard label

Health hazards: Excessive contact can cause eye, skin or respiratory irritation.

Environmental hazards: No obvious hazards.

Explosion hazard: Non-flammable liquid, no explosion hazard.

Part III Product Introduction

Explosion hazard: Non-flammable liquid, no explosion hazard.

TENICK T1012A is suitable for the thorough cleaning of UV-curable adhesives on precision fixtures.

It is a suitable cleaning solution for soaking, ultrasonic and spray cleaning. It is low in vulcanization and non-flammable. Water-based cleaning agent for the removal of glue on the fixture.

Part IV Product Performance

Project	Technical indicators
Exterior	Colorless to pale yellow transparent liquid
Boiling point (°C)	≥100℃
Relative specific gravity (20 ° C)	1.05±0.05
Water soluble	Dissolved in water
PH (10% DI water dilution)	5.0±0.5

Part 5 Product Features

1. Low foaming water-based environment-friendly type, non-flammable and explosive, with mild odor.

2. Strong cleaning ability, strong removal of various steel mesh solder paste and organic matter.

3. Contains corrosion inhibition factor to prevent corrosion of the device.

4. It is easy to rinse without residue, and the device is bright as new after cleaning.

5. Long cleaning life, multiple use, safe and effective.

Part VI Usage and precautions

1. Stock solution: water (deionized water) = 1:3 diluted and used.

2. The cleaning temperature range is 50 ± 5 °C. Cleaning time is 3 to 5 minutes.

3. Can not be mixed with any other cleaning solution.

4. Please refer to the MSDS data of this product for safe use instructions.

Part VII Storage matters

1. Warranty period: 1 year (sealed)

2, stored in a good place at room temperature, cool, dry, ventilated, avoid high temperature direct, the temperature is between 30% - 90%;

Previous：No more

Next：Solder paste Water-based cleaner T1006W TDS

Product Center

News Center

Contact Us

Water-based cleaner

UV curing glue Water-based cleaner T1012A

Category：Water-based cleaner

相关产品：

Crystal element cleaner

Camera module cleaner

ROC-600PCBA online cleaning mac

相关新闻：

Choose us

Contact

Online Message